Janisol C4

Janisol C4 is a complete profile system for glazed single and double leaf fire doors and glazing. The profiles with a basic depth of just 70 mm achieve security classifications up to EI90 due to the innovative fire-resistant infill panels. As these constructions are often used for emergency escape routes, an electrical connection to monitoring devices and alarm systems is often required. Janisol C4 profiles are therefore supplied with a cable duct as standard, which allows very simple and secure electrical connections. It can be retrofitted, if required. Appearance of the Janisol C4 fire-resistant construction is identical to the other Jansen fire protection barriers and the thermally insulated Janisol systems. Janisol C4 permits the use of particularly narrow outer frame profiles. The fabricator has recourse to a wide selection of various glass thicknesses and panels. The profile range, fittings, accessories and fabrication aids are identical for EI60 and EI90. The only difference is the choice of glazing. The result is maximum efficiency in planning and storage, as well as in fabrication and installation.

Fire resistant heat insulated steel system for doors, fixed windows and partitions/compartments
70 mm basic depth, flush-fitted profile view
Narrow face width:
- Frame and leaf from: 107,5 mm
- Meeting stile assembly 155 mm
Can be combined with side and top fixed windows, inward and outward opening; single and double leaf doors, fixed windows
Infill unit thickness of 15 mm to 47 mm
Glazing installed by means of dry or wet glazing
System tests in accordance with product standard EN 14351 and EN 16034
Profile bonding technology tested in accordance with EN 14024
Strength requirements in accordance with EN 1192
Raw finish or pre-galvanised steel profiles, high-quality insulating bar made of glass fibre-reinforced polyester
Large range of system-tested door fittings and automation solutions
Easy-access thresholds
Suitable for powder and wet paint coating

Product types and details that ensure long-lasting and providing excellent insulation indoors and outdoors;

Single Leaf Door
Single Leaf Door with Side Fixed
Single Leaf Door with Top Fixed
Single Leaf Door with Side and Top Fixed
Double Leaf Door
Double Leaf Door with Side Fixed
Double Leaf Door with Top Fixed
Double Leaf Door with Side and Top Fixed
Fixed Window
Compartment

Janisol C4 fire resistant doors, which will be found in outdoor areas specified in the EN 16034 and EN 14351 harmonized standard, can be offered as CE marked with the values specified in the table.

Standard ID	Characteristic	Classification/Value
EN 1634-1 EN 13501-2	Fire Resistance	EI₁60 EI₂60 EI₂90
EN 1634-3 EN 13501-2	Smoke Control	S_a S₂₀₀
EN 12210	Resistance to Wind Load	Class 4
EN 12208	Waterthigtness	4A
EN ISO 10140	Sound Insulation R_w (C, C_tr)	R_w: 43 dB (-1; -4)
EN ISO 10077-2	Thermal Production U_f (W/m²K)	2,9 W/m²K
EN 12207	Air Permeability	Class 4
EN 1192	Classification of Strength Requirement	Class 4
EN 1191 EN 1603	Mechanical Durability	Class 6 200.000 cycle
EN 12217	Operating Forces	Class 2

The values specified in the table represent the highest values that the system can take. The characteristic values may be variable according to the requested product type. Consult our specialist for detailed information.

In addition to the product-specific equipment developed by Jansen, Janisol C4 doors can also be equipped with pleasant non-system equipment.

Hinge
- Height Adjustable Weld-on Hinge
- 3D Adjustable Weld-on Hinge
- Surface Mounted Screw-on Hinge
- 3D Adjustable Screw-on Hinge
- Concealed Hinge
Self-Closing Device Option
- Surface Mounted Door Closer
- Concealed Door Closer
- Electromechanical Hold-open Device
- Additional/complement devices
Lock & Opening Option
- Latch&Bolt Lock acc. to EN 12209
- Latch&Bolt Lock and Door Handle acc. to EN 179
- Panic Devices acc. to EN 179 or EN 1125
- Cranked Handle and Knob Handle acc. to EN 1906
- Electromechanical Release Devices
- Custom Design Pull Handle
Automation or Access Control Systems